Wire the fan by connecting the green/bare ground to the box ground, white neutral to white, black motor wire to hot, and blue (or red) light wire to switched hot, ensuring all connections are secure and the box is fan-rated.

Safety First

Always turn off the circuit breaker supplying the fan before touching any wires and verify with a non-contact voltage tester that the wires are de-energized . Use fan-rated junction boxes capable of supporting at least 50 lbs, as standard light boxes cannot handle fan vibration . Use wire nuts of appropriate size to secure connections.

Wire Identification

• White wire: Neutral, completes the circuit
• Black wire: Hot, powers the fan motor
• Blue wire: Hot for the light kit (some fans use red instead of blue),
• Red wire: Optional switched hot for separate light control
• Green or bare wire: Ground, connects to the box and fan bracket

Standard Single-Switch Wiring

1. Connect the green/bare ground wire from the fan to the house ground wire and the fan bracket's green screw .
2. Connect the white neutral wire from the fan to the ceiling box white wire.
3. Combine the black motor wire and blue light wire and connect them to the single switched hot wire from the wall switch. This allows both fan and light to operate together .

Separate Fan and Light Control

1. Use a three-conductor cable (14/3 or 12/3) from the switch to the ceiling box .
2. Connect the black fan motor wire to one switched hot (usually black) and the blue or red light wire to the second switched hot (usually red), .
3. Neutral and ground connections remain the same. This setup allows independent control of fan speed and light from separate switches.

Pull Chain or Remote Control

• If no wall switch is available, the fan can be controlled entirely by pull chains or a remote control unit. Remote receivers simplify wiring by combining fan and light control into a single hot wire while still allowing independent operation .

Wire Size and Circuit Considerations

• Use 14 AWG wire on a 15A circuit for standard residential fans .
• Ensure all connections are made in accessible junction boxes.
• For long runs, consider voltage drop; NEC recommends a maximum of 3% for branch circuits . By following these steps, you ensure a safe, code-compliant, and functional ceiling fan installation with options for single or separate control of the fan and light.